Skip to content

Understanding Types of Diamond Inclusion – An Ultimate Guide

    Diamond-inclusion

    If your search for ultimately perfect diamond has begun then you must have come across the term inclusion or popularly known as impurities. If your finalized diamond has passed of perfect color and perfect cut yet the last leap of ultimate sparkle might be a hurdle to come through. The inclusion falls in the clarity grading criteria of diamonds.

    The inclusions can usually be seen under 10 x enlargements making them unnoticeable to the naked eyes. Diamonds that have large inclusions or many diamond inclusions are known as a low clarity grade. Understanding what an inclusion means, how they are formed, types of inclusions, and many more factors will bring you a step closer to unraveling diamond purity perfection.

    Let’s begin with understanding the exact meaning of inclusion.  

    What are inclusions?

    Diamonds are formed naturally inside the earth’s surface. Almost all diamonds contain inclusion(s) in either form. Take inclusion as a ‘birthmark’ on a diamond. However, any mark on the surface of the diamond is known as a ‘blemish’.

    Although inclusion might seem like a flaw, in a way it adds uniqueness in diamonds. It is a common misconception that an inclusion is the black marks seen in diamonds. The truth behind these black marks is that they are crystals inside the diamond containing mineral carbon. In fact, there are various types of inclusion in diamonds and surprisingly not all formed during the natural processes. Each inclusion states a different cause resulting in a different effect on the appearance.

    How do the Gemologists Grade inclusions in Diamond?

    GIA and AGS are the reputed third-party diamond certifying laboratories. They follow a set of strict guidelines for determining and identifying the inclusion in Diamond. From location to size, there are numerous factors that lay vital impact on a diamond’s clarity grade.

     Here are the notable criteria judged by Gemologists for identifying diamond inclusion:

    • The size of the inclusion is essential to determine the damage done by the inclusion. The same holds high importance in identifying the clarity grade of the diamond.
    • The quantity (numbers) of the inclusion as the more inclusions will be there on the diamond, the less it will be on the clarity grade.
    • The next important aspect is the location of the inclusion on the diamond. The inclusions on the surface are less likely to be degrading the diamond than the ones inside.
    • The impact of the inclusion(s) on the diamond matters the most. The inclusions might look small and be on the surface but could have affected the diamond substantially.

    Types of Diamond Inclusions 

    Inclusions can be different types. We have jotted down the major categories of diamond inclusions that have been widely found. 

    Bearded Girdle

    The surface of the stone extended from the girdle reflects hair-like lines. These lines appear during the cutting of the diamond. In some cases, the girdle appears heavily bearded giving an impression of a fuzzy fringe or looks like a scratch.

    Bruise 

    The inclusion occurs at a facet junction and appears as if there are tiny root-like feathers.

    Cavity 

    This inclusion appears like a deep or large opening on the diamond’s surface. The inclusion is usually created while polishing the internal blemish and gets dislodged leaving an opening on the diamond’s surface. The cavity often traps dirt and oil which eventually increases the visibility. 

    Chip

    This inclusion is typically man-made and caused during the accidental knocks or wear and tear. The chip is a small/ shallow opening on the diamond’s surface near the girdle, culet or facet junctions.

    Cloud

     This type of inclusion comprises many clusters of pinpoints or crystals found tightly packed around each other. Depending upon the nature of the inclusion, it could be a serious issue when it comes to appearance.

    Crystal

    When a mineral crystal is contained within the diamond then it is known as crystal inclusion. The crystal could be of any type like colorless or black could be carbon, red like the garnets, or even green such as peridots. 

    Crystal Surface

    This inclusion has a mineral crystal inside a diamond almost near the surface. 

    Feather

    It appears like a fracture inside the diamond. Depending on the viewing angle, a feather inclusion could absolutely be transparent or it can appear when light catches the facture. In some cases where feathers reach the girdle, surface, or affect them both can give rise to durability issues.

    Grain Center

    The inclusion is caused due to irregular growth in crystals. In this, the internal graining sometimes appears like faint lines or milky or hazy. Subject to their severity, the inclusion can appear like reflections or creases.

    Indented Natural

    This inclusion is usually found at the girdle and is the rough part that lies below the polished surface of the diamond. It is a part of the unpolished diamond that was left untouched.

    Internal Graining

    This occurs due to the irregularity of crystal growth. This inclusion could be in the form of lines, curves, or angles that sometimes affect transparency at 10X magnification.

    Internal Laser Drilling

    During the laser drilling in the diamond sometimes that creates surface-stretched feather or could expand pre-existing feather that could reach to the surface of the diamond. This could cause durability issues. In some cases, the inclusion is controlled by bleaching.

    Knot

    This inclusion in a white or transparent crystal like appearance extends to the surface.

    Laser Drill-hole

    It is in the form of a tiny, surface-reaching hole caused by a laser light beam.

    Needle

    This inclusion is a thin, elongated tiny rod in the form of a crystal that is visible at 10X magnification.

    Pinpoint

    It looks like a tiny dot or a very tiny crystal visible under magnifying glass.

    Twinning Wisp

    This inclusion is a series of clouds, pinpoints, or crystals formed during the growing process. The inclusion is linked with twinning planes and crystal distortion.

    Cleavage

    Cleavage inclusions are straight cracks. In some cases, these cracks can be deeper and split the diamond apart. This inclusion is considered as a serious flaw and diminishes the stability.

    Etch Channel

    This inclusion is a hollow tunnel that starts from the surface and penetrates the body. It is very similar to internal laser drilled inclusion.

    Extra facet

    Extra facet inclusion is a flat and polished surface. The inclusion can occur anywhere on the diamond.

    Flux Remnant

    Fluxes in the diamonds are either flat, or tabular, or vaguely triangular. The fluxes aren’t properly visible under 10 x magnifications.

    Manufacturing Remnant

    This is a man made inclusion that occurs during the polishing or could be the result of encountering excessive heat. Some cases show milky patches but mostly manufacturing remnants are not visible.

    Minor Details of the polish 

    The minor detail of polish is barely noticeable and doesn’t count as flaws even by the grading system. They are the tiny marks left on the surface while polishing.

    Surface Graining

    This inclusion occurs due to impurities resulting in growing crystals on the surface of the diamond. The inclusion can cause grain lines after the crystals are removed. These lines can disappear after polishing.

    Natural 

    A natural inclusion occurs due to the natural course. Diamond cutters prefer to leave on the inclusion to show that they haven’t taken much diamond off during the process.

    Final thought

    Diamonds are the gift of nature. We have explored everything there could have been about inclusions. This blog aims to help you identify the types of diamond inclusions and we hope you would now easily trace which inclusion is causing what damage. 

    At The Diamond Port, we examine every diamond thoroughly before delivering,ensuring that your purchase is a memorable experience. We’ve earned the title of world’s simplest diamond B2B marketplace, and our goal is to become the best B2B marketplace in the world.

    Leave a Reply

    Your email address will not be published. Required fields are marked *